Author Topic: Help with reamer  (Read 5195 times)

Brad_23

  • Guest
Help with reamer
« on: January 08, 2017, 05:44:42 PM »
If I use the m.t crow guts what size of a reamer will I need ? I have researched and. Found that there is many different sizes to choose from.i have not posted here in a while but still reading old and new post.. Thanks for any and all help.

Offline VECtor Calls

  • Global Mentor & Moderator
  • New Forum Member
  • *
  • Posts: 11265
  • Location: Whitetail Country
  • VECtor Custom Calls
    • VECtor Custom Calls
Re: Help with reamer
« Reply #1 on: January 08, 2017, 11:54:06 PM »
The crow guts are MT2. So use an MT2 reamer.
Pass on the tradition. A candle loses nothing by lighting another candle.

VECtor Custom Calls
Deer Grunt Calls Turkey Calls and Other Custom Game Calls

Offline VECtor Calls

  • Global Mentor & Moderator
  • New Forum Member
  • *
  • Posts: 11265
  • Location: Whitetail Country
  • VECtor Custom Calls
    • VECtor Custom Calls
Re: Help with reamer
« Reply #2 on: January 08, 2017, 11:56:50 PM »
I would HIGHly suggest reading up on this tutorial and exploring your options before you buy the MT2 reamer though. They are not cheap. You may find the need for a MT2 drill bit if you decide to not follow the tutorial too.

http://thogamecallsforums.com/index.php/topic,12218.0.html
Pass on the tradition. A candle loses nothing by lighting another candle.

VECtor Custom Calls
Deer Grunt Calls Turkey Calls and Other Custom Game Calls

Brad_23

  • Guest
Re: Help with reamer
« Reply #3 on: January 09, 2017, 07:36:13 AM »
Yeah I have read that and that's why I was asking what reamer I would need if I decided to go the mt2 route..and I see they coast few dollars