Author Topic: #2mt drill chuck  (Read 2697 times)

Offline Repeat

  • Custom Call Maker
  • ****
  • Posts: 371
  • Age: 61
  • Location: Northern Ca. Cottonwood
#2mt drill chuck
« on: April 16, 2009, 01:42:03 AM »
Today I found a #2mt drill chuck at harbor freight it listed for $9.99 but if you look at there web site it is listed for $6.99 you will need to print the add copy from site and take it to the store to get the $6.99 price I nevere can fiquer out why they do this?? Any way thought somebody might need one thought it was great price!!
All so saw some sand paper in 600-1000-1500 grits for around $6.95 pk saw post the other day somebody was looking for finer grit paper  hope this helps out!!

Repeat
Will Hunt For Food

Offline Bob from Eames Custom Calls

  • Global Mentor & Moderator
  • Custom Call Maker
  • *
  • Posts: 2134
  • Age: 47
  • Location: Dallas, OR
  • Eames Custom Calls
Re: #2mt drill chuck
« Reply #1 on: April 16, 2009, 11:02:47 AM »
I've got several of thier chucks, great deal on those. Watch out fot thier sandpaper. I use alot of the coarser stuff in thier sanding poll packs, but thier fine grit stuff is too loosley graded for my taste, so I buy 3M wet/dry from Napa by the sheet. Thanks for the hook up, I might have to go get a couple more at that price.

 Bob
My biggest fear is that I'll die and my wife will sell my callmaking supplies for what I told her they cost.....

Offline fowl attitude

  • Custom Call Maker
  • ****
  • Posts: 292
    • fowlattitudecalls.com
Re: #2mt drill chuck
« Reply #2 on: April 16, 2009, 11:07:09 AM »
i saw the chuck in the sales paper i need to go get me one so i can quit taking mine out of my drill press. i buy my sandpaper from hut i dont know if i am paying to much but i like it and it has worked good i go up to 2000 grit

Offline knightmare831

  • Custom Call Maker
  • ****
  • Posts: 614
  • Age: 36
  • Location: Clayton, NC
  • High Speed Wood Whittler
    • Outdoors Addiction Game Calls
Re: #2mt drill chuck
« Reply #3 on: April 16, 2009, 11:22:19 AM »
Do you use the Magic Sand too FA?

Offline fowl attitude

  • Custom Call Maker
  • ****
  • Posts: 292
    • fowlattitudecalls.com
Re: #2mt drill chuck
« Reply #4 on: April 16, 2009, 11:42:31 AM »
no i dont use magic sand. i use scotch brite (spelling?)

Offline harvey8542

  • Custom Call Maker
  • ****
  • Posts: 759
  • Age: 38
  • Location: Clintonville, Wisconsin
  • Team Stubble Stalkers
    • Stubble Stalkers
Re: #2mt drill chuck
« Reply #5 on: April 16, 2009, 11:47:51 AM »
Thank you for the heads up just order one :bigup:
Great deal on advertising two of your calls for a year on http://stubblestalkers.com/simplemachinesforum/index.php

Offline knightmare831

  • Custom Call Maker
  • ****
  • Posts: 614
  • Age: 36
  • Location: Clayton, NC
  • High Speed Wood Whittler
    • Outdoors Addiction Game Calls
Re: #2mt drill chuck
« Reply #6 on: April 16, 2009, 11:48:08 AM »
lol, ok.  I use the Magic Sand for my finish sanding.  I bought the combo pack from him and I've been pretty happy with it.

Offline fowl attitude

  • Custom Call Maker
  • ****
  • Posts: 292
    • fowlattitudecalls.com
Re: #2mt drill chuck
« Reply #7 on: April 16, 2009, 11:49:43 AM »
is it basically the same thing?

Offline knightmare831

  • Custom Call Maker
  • ****
  • Posts: 614
  • Age: 36
  • Location: Clayton, NC
  • High Speed Wood Whittler
    • Outdoors Addiction Game Calls
Re: #2mt drill chuck
« Reply #8 on: April 16, 2009, 12:00:12 PM »
yeah pretty much.

Offline GameThumper

  • Custom Call Maker
  • ****
  • Posts: 85
  • Age: 54
  • Location: Deer Park, TX
Re: #2mt drill chuck
« Reply #9 on: April 17, 2009, 09:46:13 AM »
Magic sand works great unless you are wanting to wet sand with slurry. The slurry doesn't stay on top of the mesh
like sand paper.

Tip on Magic Sand.... keep a marker handy. When you cut a piece off, mark the back with a 3, 4, 6, 12 etc...
representing 300 grit, 400 grit etc.... Otherwise you may find yourself buffing your finished call with a non-desirable grit.  :oops:

They all look pretty much the same. Some difference but not much.
If YOU ground check it,
It goes on YOUR strap.

Offline schwert

  • Custom Call Maker
  • ****
  • Posts: 171
  • Age: 62
  • Location: Seattle WA USA
Re: #2mt drill chuck
« Reply #10 on: April 27, 2009, 04:20:01 PM »
Stopped at Harbor Freight this weekend and bought the #2MT chuck.  It seems worth a whole lot more than $7 to me....thanks for the tip.

Offline Repeat

  • Custom Call Maker
  • ****
  • Posts: 371
  • Age: 61
  • Location: Northern Ca. Cottonwood
Re: #2mt drill chuck
« Reply #11 on: April 29, 2009, 04:44:30 PM »
You are welcome on the tip glad I could help....
Repeat
Will Hunt For Food