Author Topic: Pot call worksheet  (Read 4757 times)

Offline J.Palmer

  • New Forum Member
  • *
  • Posts: 6
  • Age: 39
  • Location: Rineyville KY
Pot call worksheet
« on: April 05, 2016, 01:14:07 PM »
 was a turkey call template on here I was using on here and I can't seem to find it
Jay

Offline David @ Mad Duck Game Calls

  • Tutorial Contributor
  • Custom Call Maker
  • *
  • Posts: 2657
  • Age: 17
  • Location: Oklahoma city, Oklahoma
Re: Pot call worksheet
« Reply #1 on: April 05, 2016, 01:35:22 PM »
Last I saw it had some sort of virus hooked to it and was removed.
David
-------------------------------------------------------
"If you want me to agree with you, I can, but then we'd both be wrong" 
-------------------------------------------------------

Mad Duck Game Calls Facebook Page

Mad Duck Game Calls Website

Offline B Hoover

  • Custom Call Maker
  • ****
  • Posts: 632
  • Age: 47
  • Location: North Platte, NE
Re: Pot call worksheet
« Reply #2 on: April 05, 2016, 01:53:28 PM »
I don't know that I've ever seen one on here before, but here's one I made up.  Hope this works.  Also an anatomy sketchup from the tutorials.



Whatever you do, work at it with all your heart, as working for the Lord, not for men  Col 3:23

Offline J.Palmer

  • New Forum Member
  • *
  • Posts: 6
  • Age: 39
  • Location: Rineyville KY
Re: Pot call worksheet
« Reply #3 on: April 05, 2016, 02:11:03 PM »
Thanks  B  that will work it look real similar to that
Jay

Offline VECtor Calls

  • Global Mentor & Moderator
  • Custom Call Maker
  • *
  • Posts: 11264
  • Location: Whitetail Country
  • VECtor Custom Calls
    • VECtor Custom Calls
Re: Pot call worksheet
« Reply #4 on: April 06, 2016, 08:56:49 AM »
Thank you for sharing!
Pass on the tradition. A candle loses nothing by lighting another candle.

VECtor Custom Calls
Deer Grunt Calls Turkey Calls and Other Custom Game Calls

Offline VECtor Calls

  • Global Mentor & Moderator
  • Custom Call Maker
  • *
  • Posts: 11264
  • Location: Whitetail Country
  • VECtor Custom Calls
    • VECtor Custom Calls
Re: Pot call worksheet
« Reply #5 on: April 06, 2016, 09:25:03 AM »

If a guy had mad skills, you could write a program that has each measurement co-relate to the others, to see what changing one measurement does to your total inside volume of air, and then also how much volume for air escape in the bottom holes vs. material of the pot.

Once you know the sweet spot numbers, can you then tweak one in coorelation too another and get similar final sound results. Rather than trial and error on the lathe.

Plug in a sound file for 10 different demensions, then have the computer program tell you the tuning hit, you could make these changes to hit in the middle. Plug in janko wood hardness and all.

Lol. Sounds like a crazy engineering project!
Pass on the tradition. A candle loses nothing by lighting another candle.

VECtor Custom Calls
Deer Grunt Calls Turkey Calls and Other Custom Game Calls

Offline B.Meuchel

  • Custom Call Maker
  • ****
  • Posts: 62
  • Location: Greeley CO
Re: Pot call worksheet
« Reply #6 on: April 06, 2016, 02:15:43 PM »
Nice worksheet B. Great way to keep everything organized, another measurement you could add would be from the bottom of "I" to the top of "J". That internal depth is a good one to keep in mind.

Offline JP ( liljohn ) Wilkinson

  • Custom Call Maker
  • ****
  • Posts: 238
  • Age: 50
  • Location: Brooksville, MS
  • Soggy Bottom Game Calls
Re: Pot call worksheet
« Reply #7 on: April 06, 2016, 08:38:12 PM »
Nice work sheet. Thanks for sharing.     :up1:

Offline B Hoover

  • Custom Call Maker
  • ****
  • Posts: 632
  • Age: 47
  • Location: North Platte, NE
Re: Pot call worksheet
« Reply #8 on: April 06, 2016, 08:47:32 PM »

If a guy had mad skills, you could write a program that has each measurement co-relate to the others, to see what changing one measurement does to your total inside volume of air, and then also how much volume for air escape in the bottom holes vs. material of the pot.

Once you know the sweet spot numbers, can you then tweak one in coorelation too another and get similar final sound results. Rather than trial and error on the lathe.

Plug in a sound file for 10 different demensions, then have the computer program tell you the tuning hit, you could make these changes to hit in the middle. Plug in janko wood hardness and all.

Lol. Sounds like a crazy engineering project!


Don't forget a cgi striker!!!!!
Whatever you do, work at it with all your heart, as working for the Lord, not for men  Col 3:23

Offline Justin Hoikka

  • New Forum Member
  • *
  • Posts: 1
Re: Pot call worksheet
« Reply #9 on: April 06, 2016, 08:59:36 PM »

If a guy had mad skills, you could write a program that has each measurement co-relate to the others, to see what changing one measurement does to your total inside volume of air, and then also how much volume for air escape in the bottom holes vs. material of the pot.

Once you know the sweet spot numbers, can you then tweak one in coorelation too another and get similar final sound results. Rather than trial and error on the lathe.

Plug in a sound file for 10 different demensions, then have the computer program tell you the tuning hit, you could make these changes to hit in the middle. Plug in janko wood hardness and all.

Lol. Sounds like a crazy engineering project!

I am very busy at work right now but when it slows down I should be able to do all of this in Solidworks except the sound files. I have modeled my pot calls in Solidworks before to get an idea of what the final product will look like. It is very handy to try different things on the fly without taking the time to turn one and helped me visualize the final product since I am just getting started.

Offline VECtor Calls

  • Global Mentor & Moderator
  • Custom Call Maker
  • *
  • Posts: 11264
  • Location: Whitetail Country
  • VECtor Custom Calls
    • VECtor Custom Calls
Re: Pot call worksheet
« Reply #10 on: April 06, 2016, 10:10:03 PM »
Sweet deal man. It would be cool to see the total volume of a pot call easily measured.
Pass on the tradition. A candle loses nothing by lighting another candle.

VECtor Custom Calls
Deer Grunt Calls Turkey Calls and Other Custom Game Calls

Offline dannylang

  • Custom Call Maker
  • ****
  • Posts: 99
  • Age: 55
  • Location: AMELIA VIRGINIA
  • Custom Call Maker
Re: Pot call worksheet
« Reply #11 on: January 25, 2017, 08:35:46 PM »
what happened to the dimensions?
dannylang