This is honestly one of the most difficult......Nah, THE most difficult piece of wood I've ever turned into a turkey pot. I drill my sound holes before turning the blank, and I was having a heck of a time with tearout while hollowing the inside and shaping the underside, regardless of what tool I used or how I presented it. I wound up "stabilizing the edges of the holes with thin CA and making my final cuts. It was a nightmare and it took four times longer than it should've. I had to start sanding at 180 grit to get rid of the tearout, whereas I normally start at 220. Until this call I didn't even own any 180! Very happy with the end result but it was a bit of a journey.
The second piece is going to get itself stabilized at Woodlab before it becomes a call!!!