Alrighty so when I got off work tonight I still had enough energy to do a tutorial for you guys I got my inspiration for making my boxes from Superdirt he has a video on here on how he does his which might help you out too. Here is my attempt at a box making tutorial. It would have been alot better if I had done a video of me making them and for this tutorial I used tape to hold them together instead of hot glue that I normally use. So I buy a pack of 50 sheets of 12''x12'' card stock paper from Hobby Lobby. You can get it in pretty much any color but I get brown. I take a ruler and measure out 5'' from one side and from the same line I measue out to 5.25" the bigger 1/2 is the one that is your top box.You will have a trash piece of card paper that is about 2'' wide and 12'' long. I cut the 5'' and 5.25'' sections into two separate pieces.Next, on the 5'' section I measure up 1.5'' and draw a line. On the 5.25'' section I measure up 1.7'' and also draw a line.Then I fold the two sections at the line. Each section will have two layers of paper for the sides and one layer on the bottom.Here also you will have a trash section that you cut off and then it will look like this.Then I take and glue up the box to where there are two layers on the walls and one layer on the bottom of the box.Next I cut a .7'' line up each side on the bottom of the big section and I cut a .5'' line up each side on the bottom of the small section.Then I insert the bottom flap of the box inside the walls of box and glue it up.One you have all of your sections glued up you will have yourself a box. Hope this helps you guys out a little bit if you run into any trouble with it just let me know. Matt