THO Game Calls Forums
The Art of Handcrafting Custom Game Calls => General Call Making Discussions => Topic started by: Jon Kennedy Custom Calls on February 11, 2009, 05:53:07 PM
-
Is there any interest in 1/2" to 3/4" expanding Mandrels with 2Mt taper ?? the expanding mandrel sleeve would be 2 3/4" long and would expand the full length of the 2 3/4" these are photos of a 5/8 mandrel i can build them from 1/2" to 3/4" let me know what you think !any feed back would be great!!!!! :2up: :punk:(http://i673.photobucket.com/albums/vv92/Minnesota2482/Mandrelphotos001.jpg)(http://i673.photobucket.com/albums/vv92/Minnesota2482/Mandrelphotos005.jpg)(http://i673.photobucket.com/albums/vv92/Minnesota2482/Mandrelphotos003.jpg)
-
I have one in 1/2", 5/8" and 3/4" and love them.
EDIT: I mis-read the original post. I use to have a 5/8" with 2MT taper, but now I have the ones I mentioned with straight bars that I use with the collet chuck. Much easier to use than the one with the MT. As Marvin indicates, you need a draw bar for full capabilities.
-
I have a 3/4", what about 1/2, and 5/8?
Kuipdog
-
Are they fitted with a draw bar? Steel or brass?
Marvin
-
I would like to know more about one.
-
I'd like to see some pictures of what you have in mind to make. There's lots of folks looking for other ways to skin a cat.
Parker
-
There's lots of folks looking for other ways to skin a cat.
Parker
Bobcat is pretty good chicken fried, I don't recommend house cats, usually too much fat on them. House cats do make decent tamales if you spice them up quite a bit, I think that and dog is what Gerhard's uses for meat in their tamales.
Marvin
-
Are they fitted with a draw bar? Steel or brass?
Marvin
Yes they have a draw bar and they are steel!
-
Are they knurled at the location where the call barrel contacts the mandrel?
Do you have any pics of them?
Thanks,
Brian
-
No it is not Knurled! it seems to hold fine!
Are they knurled at the location where the call barrel contacts the mandrel?
Do you have any pics of them?
Thanks,
Brian
-
I am sure I have had house cat at the local Chinese place but I don't want to know
-
The Mandrel pictured sure looks like a solid piece of tooling.With the wider expansion slit I would think it would expand more than the 2 thousands I've seen on another expanding mandrel,which I didn't like.I'd prefer a set-up to slide into my Collet Chuck or even my Nova Chuck while they're mounted though.
-
I might be interested. The MT 2 isa good idea as long as it has the draw bar. What kind of price range are we talking here?
-
I might be interested. The MT 2 isa good idea as long as it has the draw bar. What kind of price range are we talking here?
Yes these have a 3/8 draw bar!!!!!! :bigup:
-
How much are we looking at for price and can you make any size from 1/2" to 3/4" or just the normal ones like 1/2", 5/8" & 3/4"???
Larry
-
This originally started out as a question and answer session about expanding mandrals. But it is moving into the area of mandrels for sale. If that is the case, we should be taking it to the Tools and Tooling for Sale section. Just a heads up on this. Thanks.
-
Do these mandrels have a 60 degree dimple on the tailstock end? They look short like they are designed for use without a tailstock. Can larger recessed area on both ends be made so the call body can be turned on the ends and then be sanded?
Marvin