THO Game Calls Forums
The Art of Handcrafting Custom Game Calls => Handcrafting Custom Turkey Calls => Topic started by: Evan @ CBC Custom Calls on February 03, 2018, 02:53:20 PM
-
Curly maple slate over slate, but the strikers are what I want to share. My grandpa made the striker on the left - acrylic with a corncob handle - in '81. It was the only striker he used from then till his last season in '91. After he passed, my father has carried it. He always has 4-5 other strikers in his pack, but I've never seen him use anything different when working a bird. Several years ago, dad was working out of town all season so I was lucky enough to use our favorite striker. That season was short....I killed two birds while using that old corncob triker in about 3 total hours in the woods. Across 3 generations, a LOT of birds have met their match in a Rist holding that corncob. To our ears, it's hands down the best sounding striker we've ever used.
The striker on the right is my reproduction. I copied every aspect as close as I could, right down to the exact same weight. And I'll be damned if it doesn't sound exactly the same. It may not be the prettiest, but it's awfully special to us. Thanks for looking!
-
That's pretty sweet. What material is the actual striker? If it's not a secret.
Lon
-
No secret, just a 3" piece of 3/8" acrylic.
-
I thought it was a fingernail or something... :huh:
Now that I look closer it is obvious!
Thanks for clearing that up for an old guy!
Lon
-
Great story. Thanks for sharing and I hope the striker continues down through the generations!
-
Great Story!
Wayne
-
WOW
MAYBE THERES A SIMILARLY I JUST PURCHASED A
Vintage turkey call slate wood Quaker Boy new old stock
THAT HAS THE SAME , LOOKING, STRIKER . THE PACKAGE
IS SEALED, NEVER BEEN OPENED. I DONT KNOW IF I WANT
TOO OPEN IT UP OR NOT ..........
-
Interesting! I'd love to see a picture.
If you wanted to make a striker like that, I'd be happy to share the measurements.
-
https://www.ebay.com/itm/Vintage-turkey-call-slate-wood-Quaker-Boy-new-old-stock/323055509696?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
I don't know if this will show up , looks like this
-
Interesting! I'd love to see a picture.
If you wanted to make a striker like that, I'd be happy to share the measurements.
I would be interested in the striker measurements.
Thanks for sharing!
Fred
-
Cob is 4.41", each end is tapered down to 0.66", high point is 0.85" at 1.5" from the top end. Cob is bored at 3/8" clean through. The acrylic is 3/8" thick, 3.176" long. 1.6" exposed from the cob. For the tip, the taper is 0.5" long down to 0.22". I dont have an angle on the tip, but it is very slightly rounded. I didnt have a great scale to weigh it, but it comes in right around 1 oz.
I'm not sure the best way to shape a corncob, but I went with very coarse sandpaper and elbow grease. It was...messy :hysterical: