Call making supplies, here is what I have...

[River Mallard]

River Mallard Calls
3603 Caribou Ct Ne
Cedar Rapids IA 52402
319-294-3388
                                                                                                           rivermallard@aol.com
Call Supply List
Mylar  .010    1 3/4" x 10" strips  $1.00
Mylar .014           2" x 10"  strips  $1.00
Mylar clear  .010 2" x 10" strips   $ .50
Duck call reeds  .010 .510w x 1.750L   $.07 each
Die cut rubberized cork  3/16"thick x .375 x .700  $.10 each
Rubberized cork  3/16" thick x 12" x 12"   $15.00
Duck call boxes  1 3/4" x 1 3/4" x 5.5"L   $1.03 each  (Black or Dark Green)
Osage Orange  1.5" x 1.5" x 18" $8, 1.5" x 1.5" x 12"  $5.25, 1.5" x 1.5" x 9"  $4.00
African blackwood  1.5" x 1.5" x 6"  $8.00
Cocobolo  1.5" x 1.5" x 18"  $10.00
Cocobolo  1.5" x 1.5" x 12"  $ 6.75
Bocote      1.5" x 1.5" x 18"  $10.00
Dymondwood  1.5 rounds x 12"  $15.00   E-mail for current colors
Polished brass  1.250 OD x .500w x .040 wall  $1.15 each
Polished brass  1.250 OD x .400w x .040 wall $ 1.15 each
Nickel coated brass bands  1.250 OD x .500w x .040 wall  $1.95each
Brass pins for pinning  bands $.03 each
Drill bits for brass pins  $2.00 each
Crow call guts, includes reed  $3.00
Goose call guts, includes reed $4.00 (for .625 bore )
Goose call guts, includes reed $4.00 (for .618 bore)
Black single reed insert, open water  $5.00
Clear double reed timber inserts $5.50 pre-tuned
Toneboard Jig  $100.00
Expanding 1/2" mandrel $80.00 M2 taper only        (also in straight shank now)
Expanding 5/8" mandrel  $80.00  M1 or M2 taper    (also in straight shank now)
Expanding 3/4 mandrel   $80.00   M2 taper only     (also in straight shank now)
Insert mandrel  .250OD  $80.00  M2 taper only

Prices do not include shipping. Please e-mail me a list of items that you want along with your zip code and I will get you a total.  I accept money orders, cashier check and personal checks. Sorry no CC or Paypal.

[River Mallard]

[River Mallard]

Well I finally got in a couple new mandrel sizes that guys have been requesting. First is the 3/4" M2 taper and the other is a 5/8" M1 taper. I also have the 5/8" M2 back in stock as well. Price is going to be $80.00 each plus shipping.  Thanks Doug   rivermallard@aol.com 

[Dunkler]

You have the best price I have seen on a Tone board jig. I do wonder though why are they all as expensive as they are? Is it mat cost in SS that makes them so high?

[River Mallard]

The material cost is not the main factor when it comes to tooling. It is the labor cost that goes into it that drives up the price. As well an sending them off to get hardened as well. Labor is the major factor...

[SP180]

Are you still selling these?

Expanding 5/8" Mandrel in M1 or M2 Taper  $80.00

[River Mallard]

I still have everything on my list for sale. Let me know if I can help. Doug   rivermallard@aol.com   

[jcz]

Guys If you need any of Doug's supplies do not hesitate to get them. He is a top notch guy and will take care of you. I have ordered from him in the past and will do so in the future.
My most recent order got lost in shipping and he sent me another package with no questions asked. Great guy and service.

 

[gunrackguy]

Doug

I followed your advice for drilling out the insert and between your 1/4" mandrel and your advice I have not had any off center holes. I start drilling with a 1/4" brad point bit for about 75% of the hole than switch to a standard drill bit for the final depth. I do all of my drilling on my drill press with a pen vice. If the hole is straight and the mandrel is true than it stand to reason the the hole will be on center after the insert is turned. I also use a 1/4" Flexcut gouge to fine tune the hole at the tip when I am tuning the duck call. I guess I had to get that plug in because I sell Flexcut carving tools.

Bob

[River Mallard]

I just updated my above list. I removed a few items that were not big sellers.. If anyone has any questions, e-mail me at rivermallard@aol.com    Doug

[tkopperl]

Everyone don't hesitate to ordering any of Doug's supplies they are top notch!  He's a great guy to deal with, sells quality mandrels/jigs, has super dry wood!!  Will be ordering again soon!

[dedduck]

Hey Doug just sent you any email with an order 

[bojiducker]

Doug, email headed your way.

[HaMeR]

I really hate to ask this question. The M2 5/8" mandrels use a draw bolt right? If so would that be a 1/4"x20 thread? Thanks!!

[Davenport Custom Calls]

Doug,
e-mail sent
-John